Water heaters have always been helpful in providing hot water when required. Most of the people use the tank-type water heaters to heat water which is a cylindrical tank with pipes attached to its ends. The heaters which are used in most of the homes are electric powered, though tank-type water heaters may also be fuel powered.The water heater not only heats water but also stores the water in the heated condition till it is ready to be used. So along with the heating system, the water heaters also come with insulation to keep the water warm.
BEST BRADFORD WHITE WATER HEATER COMPARISON CHART
BRADFORD WHITE MI40T6FBN-394
Dimensions : 0.6 x 18 x 23 inches
Weight : 120 pounds
Capacity : 40 Gallon
BRADFORD WHITE M250T6DS-1NCWW
Dimensions : 21 x 60 x 23 inches
Weight : 123 pounds
Capacity : 50 Gallon
BRADFORD WHITE M240S6DS-1NCWW
Dimensions : 21 x 48 x 24 inches
Weight : 103 pounds
Capacity : 40 Gallon
TOP BRADFORD WHITE WATER HEATER REVIEWS
Bradford White is a privately owned company and America’s largest company which manufactures residential and commercial water heaters. It produces numerous types of water heaters with various fuel sources such as natural gas, electric, propane gas, solar and heating oil powered models. Their residential water heaters are available for nearly all residential applications. Some of the top range of water heaters from Bradford White includes:
Bradford White MI40T6FBN-394 Review
The MI40T6FBN-394 Natural Gas Water Heater is a product of Bradford White brought to the public. This USA-made small-capacity water heater is intended for the household purpose.
- Product dimensions: 0.6 x 18 x 23 inches
- Product weight: 120 pounds
- Model number: MI40T6FBN-394
- Average Capacity: 40 gallons
- Capacity range: 29-60 gallons
- 40,000 BTU
- Fuel: Natural gas
- Energy factor: 0.59
- Recovery efficiency: 79%
The MI40T6FBN-394 Natural Gas Water Heater comes in white color and has only one size in this range. The tamper proof design of the drain valve makes it easy to use for an extended period. The sides and the top of the tank are covered with foam insulation. This ensures that heat loss is minimum, which in turn provides the minor consumption of energy and results in improved jacket rigidity and operation efficiency.
The Bradford White MI40T6FBN-394 40 Gallon Natural Gas Water Heater has an atmospheric vent and uses a draft diverter. This draft diverter helps in providing the range in the capacity of water being heated, that is, from 29 to 60 gallons. Used for most of the major heating applications, this MI40T6FBN-394 is very useful in plumbing. This model water heater from Bradford White is fit for a family having 2-3 people in it. This particular water heater is altitude specific and can be used for any plumbing application up to 2000’. There is a pedestal base to ensure that the water heater can stand up when not attached to any fixture on the wall. A green LED light has been installed and blink to indicate the on/off mode of the pilot. The window in the appliance provides a view of the combustion chamber and also the working of the pilot and the hammer.
The temperature and the pressure relief valve of the appliance are situated on top of the heating device. The water heaters increase the first hour delivery of hot water, thanks to the advanced proprietary algorithm, but, at the same time, minimizes the temperature build-up inside the tanks. There is no need for an external battery or electrical source for the water heater to function since the Bradford White ICON System has the intelligent gas control that comes with a millivolt technology and also a built-in Piezoelectric Igniter. There is factory installed heat traps in the water device to make sure that the energy is not lost in the form of heat. The heating device inside the water heater unit is made of a protective magnesium anode rod to keep it from getting corroded after a point of time. There is a ¾” NPT factory installed dielectric fittings for connecting the input and output of the water in the water heater.
In case the user develops some problem and needs some help with troubleshooting, the Intelligent Diagnostics feature of this MI40T6FBN-394 Natural Gas Water Heater gives a set of diagnostic codes and also prompts during the start-up. There is the factory installed Hydrojet total performance system that helps in reducing the sediment build-up inside the water heater unit tank. To make it easy to remove the gas valve without draining the water tank, the MI40T6FBN-394 Natural Gas Water Heater has a separately immersed thermowell, made from advanced polymers that isolate the electric temperature sensor the water that surrounds it. Flame arrestor in the water heater prevents the ignition of the flammable vapor outside of the water heater.
These tanks, developed by Bradford White, have linings of an exclusive and uniquely engineered enamel formula. This lining provides superior quality protection from the corrosive actions of hot water on the tanks. The company provides a six-year warranty period for the water heater. The replacement of the components and the repairs are undertaken within this warranty period.
- Maintenance free for a long period
- No regular cleaning of air inlet and flame arrestor under normal conditions
- Tamper proof design
- Enhanced performance
- Resettable thermal switch to prevent internal combustion and restriction of air flow
- State of the art technology
- Cost effective
- Leakage from parts at times
With high-class research and development facility and state-of-the-art technological advancements, the MI40T6FBN-394 Natural Gas Water Heater brought to you by Bradford White is guaranteed to give you the best durability and quality.
Check Reviews & Price On Amazon
Bradford White M250T6DS-1NCWW Review
The M250T6DS-1NCWW 50-gallon electric fuel dependent water heater is intended for a household with 3-4 persons. The M250T6DS-1NCWW 50 gallon electric water heater comes with many powerful features which make it the best buy for domestic purpose. This is the most suitable Bradford white water heater for many households.
- Voltage: 240 volts
- Capacity: 50 gallons
- Product Weight: 123 lbs
- Energy factor: 0.90
- Fuel: Electric
- Single or three phase operation
- Height: 57.5 inches
- Diameter: 20 inches
The design is evaluated and certified by Underwriters Laboratories (UL) by Part 280.707(d) (1) of the HUD Mobile Home Construction and Safety Standards for Energy Efficiency. Heat loss from the tank is avoided by covering the sides and the top of the tank with 2” non-CFC foam insulation.
This M250T6DS-1NCWW 50 Gallon Electric Water Heater abides by all the requirements that have been laid down by the DOE (Department of Energy). Fitted with all super automatic controls, this electric water heater has a surface-mount thermostat for the automatic control of temperature. This domestic model of electric water heater is fit to be used by a family that has 3 to 4 people in it. Though the standard voltage reading is considered to be 240 V, electric water heaters of the same model and specifications can be purchased under varied voltage ranges. The voltage specification and the requirements have to be discussed with the personnel from the company to make sure the right model is purchased. This energy saver model of electric water heater uses the convenience of electricity and helps to transfer the heat directly to the water without much loss.
All the models of the electric water heater from Bradford White have a special tapping on the top of the tank and are called as the T & P relief valves. The tamper proof design of the brain drain valve provides protection to the piping unit. An extra ¾” NPT dielectric piping is provided for the water connection. This feature extends the life of the water heater and also helps in easing the installation process. One can choose from the single, or the three phase operation model of the electric water heater and the 277 V specifications may only be wired in the single phase model. A flexible disk is present and called as a heat trap, which is used to minimize the heat being let out and mostly comes installed in the water heater unit directly from the factory.
The Hydroject Total Performance System that is factory installed prevents the sediment build up inside the water tank that is usually a result of the inward flow of the cold water that needs to be heated. This system also increases the first-hour delivery and also minimizes the temperature build up on top of the tank. The magnesium anode rods inside the heating units are kept protected with the help of a protective coating to prevent the corrosion and ensure the longevity of the unit. The screw in type of immersed elements in the electric water heater unit directly heats up the water, thereby reducing the energy wastage. This electric water heater also has a simultaneous and non-simultaneous operation unit. The simultaneous operations are used to indicate if both the elements are being heated, and the non-simultaneous operation indicates if only one element is being heated. With the help of the full automatic controls, one does not have to worry about overheating.
The Vitraglas lining ensures that the tank is safe from the corrosive actions of hot water. The foam insulation results in the reduced consumption of energy leading to improved functioning of the system and also improved jacket rigidity. A 6 year warranty period has been given for this electric water heater. Any replacement or repair of the water heater components can be done under this six year warranty period. With all the insulations and the protective gears attached to the water heater, this appliance is completely durable and can be used for a long period under normal conditions.
- Corrosion resistant inner and outer layers
- Energy efficient model
- Long lasting and durable
- Advanced technology for all working components
- No worry of overheating
- Quite a bit on the expensive side
With the power of the Hydrojet Total Performance System and available in single and double elements models, the Bradford White M250T6DS-1NCWW 50-Gallon Electric Water Heaters are just the right heaters to give you the power which you will need to heat your domestic water with electricity.
Check Reviews & Price On Amazon
Bradford White M240S6DS-1NCWW Review
The Bradford White M240S6DS-1NCWW Electric Water Heater models are available both with single as well as with double elements. The various features of the water heater make it a must-have electric appliance in every house.
- Product dimensions: 21 x 48 x 24 inches
- Product weight: 103 pounds
- Voltage: 240 V
- Capacity: 40 gallons
- Fuel: Electric
- Energy factor: 0.92
- Height: 46.875 inches
- Diameter: 20 inches
The M240S6DS-1NCWW Electric Water Heater is lined with Vitraglas lining which is engineered exclusively to protect the tank. The 2” foam insulation is used to cover the sides and the top of the tank. The brain drain valve has a tamper proof design. All the regulations of the DOE (Department of Energy) have been kept in mind while designing the product.
This M240S6DS-1NCWW 40 Gallon Electric Water Heater is intended for domestic households of 2 – 3 people. As the designs and the components have been made by abiding by the specifications of the DOE, this electric water heater helps in the considerable saving up of energy and also uses the convenient features of electricity. The temperature and the pressure valves are located on top of the water heater. Two elements are being used in the heating unit and thus gives rise to the simultaneous and the non-simultaneous operation of the electric water heater. Simultaneous operation is done if both the elements are heated, and the non-simultaneous operation is done when only one element is heated. The screwed in and immersed elements efficiently transfer the entire heat directly to the water.
Single and three phase operations are possible in this electric water heater. In the case of the 277 V model of the same water heater, it has to be wired to be used in a single phase operation. Apart from the standard 240 V model of the M240S6DS-1NCWW 40 Gallon Electric Water Heater, voltage ranges of 120 V, 208 V, 277 V and 240 V are available at Bradford White. For the purpose of a heat trap to ensure that heat gets retained back and no energy is lost, a flexible disk has been installed in the water heater unit directly from the factory. The Hydrojet Total Performance System helps by preventing the sediment build up which is usually brought in by the cold water. This is installed at the factory. An extra ¾” dielectric valve has been attached as an extension for the water connection. The water heater should be sealed to the floor with a coolant or installed with optional leg kits with a minimum clearance of 6” below the water heater unit.
All the special tapping for the temperature and the pressure unit and the valves are present on top of the electric water heater. The water heater is fit with full automatic control units. These controls are the surface mounted thermostat controls that help in the automatic control of temperature. The sensitive manual reset energy cut off is present to ensure that overheating is not caused. The protective coating that has been added to the magnesium anode rod helps to prevent the corrosive action of water over the rods. The M240S6DS-1NCWW 40 Gallon Electric Water Heater should not be installed in an area where there is a probability of the presence of gasoline or flammable vapors or paint thinner. The location of the water heater should be such that either leakage of the tank or the combination of temperature and pressure relief valve and water line connections would not result in damaging either the area which is adjacent to the water heater or the lower levels of the structure.
The non-CFC foam insulation helps in reducing heat loss from the water heater. Reduction in heat loss reduces the energy consumption thereby increasing efficiency and jacket rigidity. A 6-year limited tank and component warranty is provided for the electric water heater unit. This warranty period covers the replacement or the repair of the parts in the water heater. The use of bimetallic elements in the thermopile units inside the heating unit and the dielectrics in the valves and piping has helped reduce the heat loss and the occurrence of corrosion. Install the water heater at a location where the water lines are safe from being subjected to freezing temperatures. Access panels and drain valves should also be accessible wherever they are located.
- Safety units installed
- State of the art technology
- High volume of water output
- Efficient action of the components
- No worry of overheating of elements
- Heat traps to ensure saving of energy
- Expensive regarding purchase
Bradford White’s exclusive features – Hydrojet Total Performance System, ICON System Intelligent gas control and Vitraglas lining make it the ideal product for residential use for water heating, storage applications as well as combination heating.
Check Reviews & Price On Amazon
When planning to install a water heater at the house, always go in for the help from a professional. This reduces any risk or problems that might arise if the unit is not fixed properly. Always keep in mind to choose the water heater that seems to have better energy factor and energy efficiency. Ensuring that these things are in order would help a great deal in maintaining the balance in the environment. Top rated Bradford White’s residential water heaters are available for nearly all residential applications. Their innovative and multiple styles include an atmospheric vent, power vent, power direct vent, point-of-use, power direct vent, storage and tankless modes. Their extensive array of durable products, both natural as well as LP gas-powered, is guaranteed to be worth the money spent providing years of dependable service. Check out other top quality tankless heater reviews such as Navien Tankless Water Heater Reviews.